UP&R CapabilitiesRubber MoldingRubber ExtrusionsPlastic ExtrusionsUP&R PortfoliosConcrete Pipe and Manhole GasketsGOLDLINE ® and SILVERLINE® Tarp StrapsAdjustable Length Rubber Tie DownsPlastic Pipe Gaskets and Cast Iron Coupling Gaskets

Dense Rubber & Sponge Finish Extrusions

Dense Rubber & Sponge Finish Extrusions
Request Quote

For a special customer order, we provided these rubber profiles, tubing, as well as shapes with dense rubber and sponge finishes. Depending on their concrete, plastic, or PVC gasket application, these products complied with tight tolerances specified under ASTM C361 and ASTM F477 standards. Our capability to build extrusion dies and splice molds in-house facilitated minimized tooling cost. Although we extruded these profiles to 100' for the customer, UP&R can handle extrusions on reels that are 400' long as well. As instructed, we packed the extrusions in custom sized boxes and delivered them in batches within 4 weeks to the customer's location in Ohio.

Specifications

Page TitleRubber Extrusion
Capabilities Applied/ProcessesExtruded rubber into profiles, tubing, and shapes
Tightest ToleranceRMA Class 3; ASTM C361 for concrete pipe gaskets; ASTM F477 for plastic and pvc pipe gaskets
Material Thickness3"
Product Length100 ft. or more. We put many extrusions on reels that are 400 ft long.
Product Width5"
Product Height3"
Product Weight35 lbs
Temperature RangeDepends on the polymer
Base MaterialVariety of polymers including EPDM, SBR, Nitrile, Neoprene, Polyisoprene, Silicone, among others
Material UsedVariety of polymers including EPDM, SBR, Nitrile, Neoprene, Polyisoprene, Silicone, among others
ColorVarious
Material FinishDense rubber as well as sponge
PackagingExpendable is standard; customer can designate box sizes if standard Gaylord size is not acceptable
Special FeatureAbility to produce sponge as well as dense products
Secondary Operations AppliedSplicing; Punching; PSA tape application;
Industry for UseAutomotive; Construction; Outdoor Power Equipment; Transportation;
VolumeOne batch min for special orders
Delivery Time1 -4 weeks
Delivery LocationMiddlefield, OH USA
Standards MetAs dictated by customer. Concrete Pipe gaskets ASTM C443, ASTM C361; Plastic Pipe meets ASTM F477
Drawing Type AcceptedDWG; STP; STL, IGES, PRO E
Tooling CostMinimal since UP&R makes all of its extrusion dies and splice molds
Shipping CostFOB Middlefield, OH USA

^ Back to top

www.universalpolymer.com


Site created by ThomasNet Web Solutions
Universal Polymer & Rubber Ltd.